Ventilation control
The easy way to control hard-to-reach ventilators.
The new ventilation control unit enables synchronous control of up to nine ventilation units and is therefore perfect for large rooms and open-plan living areas. The ventilation control unit not only impresses with ist discreet and compact design, but also with ist simple wall installation. This means that even ventilators that are dificult to reach - e.g. when installed close to a lintel or ceiling - can be operated extremely easily and conveniently.
Various functions, such as setting the ventilation levels through to activating automatic mode or night cooling, provide even more convenience. The current air status is displayed by the ventilation control system using the traffic light principle via an LED light. In combination with automatic mode, it automatically sets the ventilation level required for a healthy indoor climate as required. The basis for the data is provided by the measured values, which are transmitted to the ventilation control system via the CO2 control of the master units.
Advantages at a glance
- Control of up to 9 ventilation units
- Status displayed using LEDs, incl. indication of the air quality using the traffic light system
- Simple wall installation
- No additional power supply required
- Wiring with prefabricated SI bus cable
- Dimensions (W x H x D): 100 mm x 109 mm x 23 mm
Compatible ventilation units
- AEROPLUS WRG wall-mounted ventilator
- AEROMAT VT facade ventilation system, except AEROMAT VT D variant
Control
The ventilation control unit follows the master-slave principle. The control unit instructs the master unit in the operating mode and air flow rate. This in turn provides feedback on status, air quality, etc. Up to 8 additional ventilation units can be connected as slave units, which follow the master unit in terms of operating mode and air flow rate.
Power supply and connection.
Power is supplied via the ventilation unit; an additional power source is not required. Pre-assembled SI bus cables in various lengths are available for the connection, which work according to the plug-and-play principle.
The connection cables are available in different lengths:
A 2 metre extension cable can also be purchased if required.
Please note that different numbers of connection cables are required depending on the ventilator and the number of ventilators. Therefore, please also take note of our further information regarding the connection on our information page.
-
109
-
100
-
23
