Ventilation control with 2-m connection cable
The easy way to control hard-to-reach ventilators.
Ventilation units that are difficult to reach - e.g. near the ceiling - can be conveniently operated on the wall with the SIEGENIA ventilation control unit as an external control unit.
Together with the AEROPLUS WRG wall ventilator or the AEROMAT VT (with the exception of the AEROMAT VT D), it combines simple operation with useful additional features that make daily ventilation easier. Equipped with sensors, automatic mode ensures that air is exchanged as required or night cooling is activated.
In combination with the automatic mode, it automatically regulates the ventilation level required for a healthy indoor climate as required. The basis for the data is provided by the measured values, which are transmitted to the ventilation control unit via the CO2 control of the master unit.
This product bundle contains the components required for installation of the ventilation control unit for connection to 1 ventilation unit:
- 1x the ventilation control unit
- 1x the connection cable (2 m length)
If required, a 2 metre extension cable can also be purchased.
Benefits at a glance.
- Control of up to 9 ventilation units
- Status displayed using LEDs, incl. indication of the air quality using the traffic light system
- Simple wall installation
- No additional power supply required
- Wired with a prefabricated SI bus cable
- Dimensions (W x H x D): 100 mm x 109 mm x 23 mm
Compatible ventilation units.
- AEROPLUS WRG wall-mounted ventilator
- AEROMAT VT facade ventilation system, except the AEROMAT VT D version
Control.
The ventilation control unit operates using the master-slave principle. The control unit specifies the mode of operation and air throughput for the master unit. The master unit in turn provides feedback on status, air quality, etc. Up to 8 additional ventilation units can be connected as slave units, which use the same mode of operation and air throughput as the master unit.
Power supply and connection.
Power is supplied via the ventilation unit; there is no need for a separate power supply. Prefabricated SI bus cables in various lengths are available for the connection, which operate using the plug-and-play principle.
This product kit is supplied with the 2 m connecting cable . It is also possible to purchase an 2 m extension cable if required.
Please note that the number of connection cables required will vary depending on the ventilator and the number of ventilators. For this reason, please also refer to the additional information regarding connection on our Information page .
